The main function of the nail dust machine is to collect dust generated during the polishing process of nail art. It is designed to be used during the polishing of nail art, which can effectively absorb dust and provide a dust-free working environment. The shell of the nail vacuum cleaner is designed to be soft and comfortable, and the hands can be placed comfortably on it. There is a fan on the front and the side is used to put the hands. There is a dust bag behind the fan. The dust bag is moderately dense and environmentally friendly and durable. The following points should be paid attention to when using the nail vacuum cleaner.
1. Avoid inhaling flammable and explosive substances and sharp objects
The nail dust machine is strictly prohibited from sucking flammable and explosive items such as gasoline and banana water, as well as sharp objects such as flaming cigarette butts, broken glass, needles, nails, etc., to prevent the vacuum cleaner from being damaged or causing accidents.
2. Handle with care and avoid violent impact
Handle the vacuum cleaner with care when operating it, and avoid violent impact to prevent damage to the machine.
3. Clean up debris and accessories in time
After use, be sure to clean up the debris in the bucket, various vacuum accessories, dust grids and dust bags in time. After each use, clean and check for perforations or air leaks, then thoroughly clean the dust grids and dust bags with detergent and warm water, and ensure that they are air-dried. It is strictly forbidden to use wet dust grids and dust bags.
4. Avoid long-term continuous operation
The nail dust machine should not work continuously for a long time. It is recommended to pause every half an hour to avoid continuous operation for more than 2 hours. Long-term continuous operation may cause the motor to overheat. If there is no automatic cooling protection, the motor may burn out due to overheating, affecting the service life of the nail dust machine.
5. Ensure that the interface is tightly connected
During use, ensure that the interface between the hose, nozzle and connecting rod is tightly connected, and pay special attention to the use of small gap nozzles and floor brushes. Avoid frequent bending of the hose to prevent excessive stretching and bending that affect its durability.